Welcome to visit en.jzssc8.com!

Hotline: +86-539-4899789

+86-539-4899789  

Service Hotline:

Sales one:+86-539-4271399        Fax:+86-539-4835288

Sales two:+86-539-8608597        Fax:+86-539-8608597

E-mail:sdjlzj@qq.com

Add:Economic development zone Mengyin, Shandong Province. China

WeChat

Shandong Julong Hydraulic Machine Co.,Ltd.

返回顶部代码

Mobile website

Copyright © Shandong Julong Hydraulic Machine Co.,Ltd. All Rights Reserved                                           

  • banner1
  • banner2
  • banner3

NEWS CENTER

>
>
Hydraulic rig maintenance hydraulic system

Hydraulic rig maintenance hydraulic system

[Abstract]:
  Hydraulic technology is a late development, but the rapid development of new technologies, is based on fluid dynamics and gradually developed. It is mainly the use of liquid pressure and force trans
  Hydraulic technology is a late development, but the rapid development of new technologies, is based on fluid dynamics and gradually developed. It is mainly the use of liquid pressure and force transmission torque, the so-called hydraulic transmission.
  Correct use and maintenance of hydraulic system is to ensure the normal operation of the system, an important factor to extend the service life.
  (1) to prevent the pollution of hydraulic oil. Hydraulic oil pollution refers to the mixing of air, moisture and dust from the outside world and the insoluble precipitate generated by the oxidation itself. The pollution of the oil will aggravate the wear between the relative motion components in the hydraulic components, resulting in throttling of small holes Blocking or sliding valve movement stuck, and will break the chemical stability of the oil, to accelerate the production of oxides and organic impurities in the oil decomposition, according to statistics, more than 75% of hydraulic system failure is due to oil pollution Caused by the fuel tank to a reasonable seal, the prohibition of the use of non-oil seals and hoses, regular cleaning and replacement of oil to prevent oil pollution, aging.
  (2) to prevent the oil temperature is too high. Hydraulic system oil temperature is too high, will reduce the viscosity of the oil, leakage increases, the volume efficiency decreases, resulting in instability of the oil speed, oil deterioration, Mo wind aging parts, in order to avoid oil temperature, in addition to selection Recommended hydraulic oil, but also pay attention to the correct level of oil in the tank to ensure that the system has enough circulating cooling oil. At the same time to maintain adequate water cooler, the pipeline smooth.
极速时时彩 秒速时时彩网站 极速快三计划 秒速时时彩 手机网投网址 上海11选5分布走势图 极速时时彩 北京快乐8 天津十一选五前三走势 手机网投网址大全